Disclaimer:

All comments posted to this web site are opinions expressed by the poster and/or the owner of this web site. The owner is not responsible for comments or repairs to computers that others may do. I will  warn you that you may be violating your computer manufacture's warrantee for certain things. Be sure to read it before opening your computer case!

I work hard to expand this free information.

You may express your gratitude by donating with your help supporting the server costs and help keeping the section alive.

Installation and use of a POST card tester

by SPONGETRUCKER
(LODI, CALIFORNIA)

I have been working on PC's for awhile now and I am always trying to improve my skills and speed as to repair and to be good at it.
So, here's my problem...I have no peers that are on my level to mentor me to help me grow. So,I read up and usually always teach myself.
What I want to know is How to use a POST Card. I purchased two if them. One has 4 digit display and other has 8. But the manual that came with them doesn't give me enough information to properly use them. There is no flow chart, no conversion tables, and I basically don't know what I am looking at.
Even a quick guide or book would help. Like , plug in here,power up. what it's doing' when it displays...do this; and then what next? Not of use to my without a little more information!!!

Can you,Please point me in the right direction?
THANK YOU,

Comments for
Installation and use of a POST card tester

Average Rating starstarstarstarstar

Click here to add your own comments

May 08, 2010
Rating
starstarstarstarstar
POST Tester Card
by: Support

Hello SPONGETRUCKER,

Now that is a tool I haven't seen in a long time.

I have one somewhere in the closet that I did use on occasion when a motherboard wouldn't start up.

I would surmise that both of your testers need to be inserted in a slot.

How ever they are proabably the old 16 bit slot cards, not PCI cards.

Compare the cards to a slot, if the card connectors are wide (about 3/32 of an inch) then they are too old to use in a modern motherboard. If they are about 1/32nd of an inch wide and the card looks like it has 32 to 64 connectors on a side they may be PCI cards.

Normally the POST card would display a digit for each step of the POST when you powered up the motherboard. If (from memeory of the one I have) the LED display started to blink on a number then the POST had failed at that step. The number of the step had a coresponding alpha numeric expination the comes with the documentation such as number 101 - 'the memory logic low line has failed.'

The card I have also has four led lights, two red, one amber, and one green. The green, amber, and one red were 5+, 12+, and ground. When lit then the voltage and ground were correct. The last led that was seperate from the other three was red and it was the power to the card led, when the card was powered then it was lit.

The only thing I can suggest is to do a search for the manufacture of the devices. I doubt that they are listed on the web, never know. Then again someone may have put the documentation up on a web site and never removed it.

Good luck with your card testers.

Click here to add your own comments

Join in and write your own page! It's easy to do. How?
Simply click here to return to Q and A

Return to top

From the Desert South West ~ Arizona, USA
Copyright DIY-Computer-Repair.Com 2006-2011

powered-by-sbi



My Twitter! xml-rss Add to My Yahoo!
Add to My MSN Add to Google AddThis Social Bookmark Button My StumbleUpon Page Computer Blogs - BlogCatalog Blog Directory

Page copy protected against web site content infringement by Copyscape

 www.diy-computer-repair.com BBB Business Review




DIY Insiders
Enter Email

Enter password



Fire that geek that is messing up your computer, you can do a better job.

Finally geek secrets revealed then translated in to everyday English!

Self Computer Repair Unleashed! E-book

The Official  www.diy-computer-repair.com Reference manuals

Get yours Today!



Home

E-Courses!

DIY Computer Repair Five Part E-Course

A seven part Advanced E-Course on computer repair for you!

Would you like to Over Clock your cpu and/or memory with out destroying them? Here is an E-Course that will show you how to do it!

What do you think of when you hear virtual computing?

Fix It! Your
DIY Computer Repair
Newsletter!

Click here to get your copy of Fix It!


Windows 7
is coming to a
computer near you!
Don't be left
wondering
what to do
!

On Release day the free e-book will not be available and the price may go up!
Order your
copy of
Windows 7
Ultimate
Guide now!


My Twitter!

Please donate $5